CES Sets the Stage for MakerBot Launch of Expanded MakerBot 3D Printing Platform and Ecosystem with a Whole New Generation of 3D Printers and 3D Content
Three New MakerBot Desktop 3D Printers, MakerBot Desktop and Mobile, MakerBot PrintShop and Digital Store, Plus Strategic Partnerships Announced at CES Expand the MakerBot 3D Ecosystem
Pirate3D to exhibit the Buccaneer 3D Printer for the First Time on CES 2014
Pirate3D will be demonstrating its printer in the United States for the first time. The company's Chief Executive Pirate (a.k.a. CEO) Roger Chang, COO Brendan Goh and Chief Designer You Jun Tsang will be giving interviews at booth #32024.
Solidoodle Showcases Newest 3D Printer at CES
Brooklyn-based 3D-printer-manufacturer Solidoodle will exhibit at 2014 Consumer Electronics Show in Las Vegas this week.
The Factory-in-a-Day Project
From Factory-in-a-Day's page:
Small and medium-sized enterprises in Europe mostly refrain from using advanced robot technology. The EU-project Factory-in-a-Day aims to change this by developing a robotic system that can be set up and made operational in 24 hours and is flexible, leasable and cheap. The project has a budget of 11 million euros for four years, 7.9 million of which will be funded by the European Union as part of the FP7 programme ‘Factory of the Future’. The international consortium comprises 16 partners and the coordinating university is Delft University of Technology (TU Delft). The project will start on 8 October 2013 with a formal kick- off meeting in Delft.
Within 24 hours
The Factory-in-a-Day-project will provide a solution to these problems: a robot that can be set up and operational in 24 hours. SME companies can use the robot for a specific job and their staff can learn how to work closely together with the robot and thus optimize their production. “With the technological and organizational innovations of the Factory-in-a-Day project, we hope to fundamentally change the ways in which robots are used in the manufacturing world”, says project coordinator Martijn Wisse, Associate Professor at TU Delft. How does it work?
What will such an installation day look like? First of all, before the robot is actually taken to the SME premises, a system integrator analyzes which steps in the process can be taken over by the robot. In most cases the repetitive work is done by the robot while the human worker carries out the more flexible, accurate tasks and deals with problem- solving.
Customer-specific hardware-components are 3D-printed and installed on the grippers of the robot. The robot is then brought to the factory and set up, and any auxiliary components such as cameras are also set up in the unaltered production facilities. The robot will be connected to the machinery software through a brand-independent software system. After that, the robot is taught how to perform his set of tasks, for example how to grasp an object. Therefore, the operator will physically interact with the robot. A set of predefined skills will be available, rather like Apps for smart phones. Finally, the robot is operational and the human co-workers receive their training -- all in just 24 hours.
3D Printing Helps German Manufacturer Seuffer Cut Tooling Costs for Prototype Parts by 97%
Companies worldwide are looking to introduce significant efficiencies to their manufacturing processes when introducing new products, and are discovering the many benefits of additive manufacturing, also known as 3D printing.
All Things Plastics Injection Molding
Many injection molders have begun their Continuous Improvement Journey and as these small teams study reduction in waste, redundancy, and efficiencies, they bring forward ideas to make more use of production robots.
Global Future 2045 Takes A Hard Look At Today
Bottom line of all of the interfaith / spiritual speakers was to emphasize that we are preoccupied with the "how" of change and not the "why."
Cloud Manufacturing
As the automation industry begins its reach into the cloud, manufacturing communities will not only improve productivity, they will begin to reclaim the prominence the industry once claimed in the economy.
Electroadhesion
Grabits electroadhesion grippers are an enabling technology. We enable mobile robots to have energy efficient manipulation where conventions like vacuum are not feasible.
3D Home Printer From 3D@Home
The consumer electronics show CES is this week so we are probably going to see a couple new 3D printers announced. MakerBot has been teasing a new version of their Thing-O-Matic and today 3D@Home announced their Cube printer. The printer will cost $1,299 and print standard .STL files to print out ABS plastic models. 3D@Home also plans to offer a print on demand service for larger models.
Records 6721 to 6730 of 6730
Mobile Robots - Featured Product
Onward Robotics - Meet Me Fulfillment Automation
Meet Me uniquely brings talent and technology together: providing end-to-end process efficiency and enabling accurate and continuous fulfillment workflows. Proprietary Pyxis technology uniquely orchestrates picker and Lumabot AMR workflows independently, delivering fast, accurate, and efficient fulfillment from induction to pack out. Learn more about Meet Me Automation: Download Overview Brochure
Robotics and Automation - Featured Company
e-con Systems
e-con Systems® develops complete embedded vision solutions—including OEM cameras and edge AI compute platforms. With 20+ years of experience and expertise in embedded vision, it focuses on delivering vision and camera solutions to industries such as Robotics, Mobility, Medical and Life Science, Agriculture, Intelligent Transport Systems, Sports Analytics and more. e-con Systems' wide portfolio of products includes MIPI camera modules, GMSL cameras, USB 3.2 cameras, Depth cameras, GigE cameras, HDR cameras, low light cameras, and more. Our cameras are currently embedded in over 350+ customer products, and we have shipped over 2 million cameras to the United States, Europe, Japan, South Korea, and many other countries.
